CNCDIY Club

Share your experience with CNCDIY's Machine
 
HomeCalendarGalleryFAQSearchMemberlistUsergroupsRegisterLog in

Share | 
 

 PCB Routing 1

View previous topic View next topic Go down 
AuthorMessage
cncdiy
Admin


Posts : 45
Join date : 2010-01-13

PostSubject: PCB Routing 1   Thu Jun 17, 2010 10:08 pm

Step1: Place a acrylic plate and fixed it on the working table with bolts



Step2: Paste a color PVC advertising sticker on the acrylic plate


Finish!


Step 3: Open the package of a new PCB



Step 4: Paste a color PVC advertising sticker on the back of the PCB


Step 5: Paste double-sided adhesive tape on the
sticker's surface which is pasted on the back side of the PCB.

.

Step 6: Paste the PCB on the surface of the color PVC advertising sticker which is pasted on the acrylic plate.

Place a soft and smooth handkerchief or tissue on the PCB surface and use a hand to impact the
handkerchief or tissue and make sure that the PCB is placed on the acrylic plate closely.


Step 7: Set the original point, which must refer to your Mach 3 setting. Please adjust the routing depth carefully!


Step 8: Start Processing


Step 9: Finish routing


Step 10: Remove the color PVC advertising sticker


Completed!
Back to top Go down
View user profile http://cncdiy.forumr.biz
 
PCB Routing 1
View previous topic View next topic Back to top 
Page 1 of 1
 Similar topics
-
» Tutorial: Perfecting Routing, an OC approach to routing paint... by eyelem
» CAW Routing

Permissions in this forum:You cannot reply to topics in this forum
CNCDIY Club :: Experience Sharing :: PCB Routing-
Jump to: